Tilde.chat/Getting Started: Difference between revisions

From Tildeverse Wiki
(Created page with "while this will ''not'' be a comprehensive guide on all the software available, it will hopefully point you in the right direction. it is adapted from the one on the [https://libera.chat libera.chat website] <span id="connecting-for-the-first-time"></span> == connecting for the first time == to use irc, first you need to choose a client application. they vary a lot, but most will have the same basic features and do ''not'' cost money, so don’t worry about picking the...")
 
No edit summary
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
while this will ''not'' be a comprehensive guide on all the software available, it will hopefully point you in the right direction. it is adapted from the one on the [https://libera.chat libera.chat website]
[[Tilde.chat|<- Back to tilde.chat]]
 
While this will ''not'' be a comprehensive guide on all the software available, it will hopefully point you in the right direction. it is adapted from the one on the [https://libera.chat libera.chat website]


<span id="connecting-for-the-first-time"></span>
<span id="connecting-for-the-first-time"></span>
== connecting for the first time ==
== Connecting for the first time ==


to use irc, first you need to choose a client application. they vary a lot, but most will have the same basic features and do ''not'' cost money, so don’t worry about picking the wrong one.
To use irc, first you need to choose a client application. They vary a lot, but most will have the same basic features and do ''not'' cost money, so don’t worry about picking the wrong one.


you can always use our webchats to avoid installing anything yet: [https://tilde.chat/kiwi/ our kiwiirc] or [https://tilde.chat/gamja/ our gamja] browser clients will automatically connect you to <code>#helpdesk</code>.
You can always use our webchats to avoid installing anything yet: [https://tilde.chat/kiwi/ our kiwiirc] or [https://tilde.chat/gamja/ our gamja] browser clients will automatically connect you to <code>#helpdesk</code>.


if you’re running a client on a tilde, your client might have been automatically configured for you when your account was made. most tildes have command line clients like [https://weechat.org weechat] or [https://irssi.org irssi] already installed so you can try them out and decide which one you prefer. try running <code>weechat</code> or <code>irssi</code> to connect to <code>tilde.chat</code>.
If you’re running a client on a tilde, your client might have been automatically configured for you when your account was made. Most tildes have command line clients like [https://weechat.org weechat] or [https://irssi.org irssi] already installed so you can try them out and decide which one you prefer. Try running <code>weechat</code> or <code>irssi</code>.


if you’re running a client you installed yourself on your own phone or computer, most will have some kind of intro or wizard to get you going. look for a network called <code>tilde</code> or <code>tilde.chat</code> if there is a network directory, or set the network address to <code>irc.tilde.chat</code> with port <code>6697</code>.
If you’re running a client you installed yourself on your own phone or computer, most will have some kind of intro or wizard to get you going. Look for a network called <code>tilde</code> or <code>tilde.chat</code> if there is a network directory, or set the network address to <code>irc.tilde.chat</code> with port <code>6697</code>.


if there is no wizard, or the process is confusing, you can try to check out the client’s website for some documentation about how to set it up. you can also just connect through the kiwiirc or gamja webchats mentioned above and find someone to help. the webchats will connect you to <code>#helpdesk</code>, and someone there can point you in the right direction if you explain what client you are trying to use.
If there is no wizard, or the process is confusing, you can try to check out the client’s website for some documentation about how to set it up. you can also just connect through the kiwiirc or gamja webchats mentioned above and find someone to help. The webchats will connect you to <code>#helpdesk</code>, and someone there can point you in the right direction if you explain what client you are trying to use.


== talking ==
== Talking ==


just like in instant messengers, there will be a field in the app where you will be able to type things. this is where you chat.
Just like in instant messengers, there will be a field in the app where you will be able to type things. This is where you chat.


this chat field is also where you can do commands to the server or the client. commands start with a <code>/</code>.
This chat field is also where you can do commands to the server or the client. Commands start with a <code>/</code>.


<span id="conversation-windows"></span>
== Conversation Windows ==
== conversation windows ==


conversations windows are also known as tabs or buffers. they behave similar to how you might expect from other chat apps.
Conversations windows are also known as tabs or buffers. They generally behave how you might expect from other chat apps.


in most desktop clients, a list of conversations will be down the left-hand side in a column. in phone apps, there might be a drawer widget you need to pull out.
In most desktop clients, a list of conversations will be down the left-hand side in a column. In phone apps, there might be a drawer widget you need to pull out.


selecting different items in this list will change what is shown in the main section of the client, above the field you type chat and commands into.
Selecting different items in this list will change what is shown in the main section of the client, above the field you type chat and commands into.


the top one is probably the name of the network. when you are doing commands you don’t want others to see, such as [[wiki/nicks|registering]] an account, this is a safe place to type them.
The top one is probably the name of the network. When you are doing commands you don’t want others to see, such as [[Tilde.chat/Nicks and Accounts|registering]] an account, this is a safe place to type them.


tabs starting with <code>#</code> are group chats, which are called <code>channels</code>. On desktop clients, a user membership list will probably show down the right-hand side of the screen when you have these conversations selected. on phones the membership list might be in another drawer widget.
Tabs starting with <code>#</code> are group chats, which are called <code>channels</code>. On desktop clients, a user membership list will probably show down the right-hand side of the screen when you have these conversations selected. On phones, the membership list might be in another drawer widget.


tabs underneath the channels are private conversations you have with people, or bots, on the network. these are often referred to as a “pm” (private message) or “queries”.
Tabs underneath the channels are private conversations you have with people, or bots, on the network. these are often referred to as a “pm” (private message) or “queries”.


<span id="private-conversations"></span>
== Private Conversations ==
== private conversations ==


you can often start private conversations with someone by double-clicking on their name, also called a nickname or nick, in the membership list. if that doesn’t work you can achieve the same thing using the <code>/query</code> command. For example, if you wanted to say “hi!” to the person with the nickname “john” you would do:
You can often start private conversations with someone by double-clicking on their name, also called a nickname or nick, in the membership list. If that doesn’t work you can achieve the same thing using the <code>/query</code> command. For example, if you wanted to say “hi!” to the person with the nickname “john” you would do:


<pre>/query john hi!</pre>
<pre>/query john hi!</pre>
some people don’t like unsolicited private conversations, so only do this with people you know from talking in channels after asking their permission.
Some people don’t like unsolicited private conversations, so only do this with people you know from talking in channels after asking their permission.


== services ==
== Services ==


services are specialized bots that help the network run smoothly. they manage users and channels, among other things.
Services are specialized bots that help the network run smoothly. They manage users and channels, among other things.


using services is how you [[wiki/nicks|register a nickname]], and identify (log in) when you return for another irc session in the future.
Using services is how you [[Tilde.chat/Nicks and Accounts|register a nickname]], and identify (log in) when you return for another IRC session in the future.


they’re also how you [[wiki/channels|register channels]] if you ever need to do that.
They’re also how you [[Tilde.chat/Channel Modes|register channels]] if you ever need to do that.


== topics ==
== Topics ==


in most irc clients, a channel’s topic description can be found at the top of the screen. if you can’t see all of it, you can have it displayed to you using the <code>/topic</code> command.
In most irc clients, a channel’s topic description can be found at the top of the screen. If you can’t see all of it, you can have it displayed to you using the <code>/topic</code> command.


you can find new channels on our [[stats|channels page]] to search by channel name or by topic description. some clients like kiwiirc and hexchat have built in channel list search wizards. in command line clients, look for search instructions with <code>/help list</code>
You can find new channels on our [https://tilde.chat/stats/ channels page] to search by channel name or by topic description. Some clients like kiwiirc and hexchat have built in channel list search wizards. In command line clients, look for search instructions with <code>/help list</code>


<span id="channel-roles"></span>
== Channel Roles ==
== channel roles ==


when you’re in channels, you might notice that some people in the membership list have symbols next to their nicknames. most people will not have a role in the channels.
When you’re in channels, you might notice that some people in the membership list have symbols next to their nicknames. Most people will not have a role in the channels.


on tilde.chat, the people with symbols have either the “admin”, “operator”, ‘half-operator’, or “voiced” modes.
On tilde.chat, the people with symbols have either the “admin”, “operator”, ‘half-operator’, or “voiced” modes.


admins own the channels. operators and half-ops (which have a subset of operator commands) are the people that run that help run specific channel and are responsible for moderating the chat, so sometimes they might remove or silence people individually or set the channel to moderated mode.
Admins own the channels. operators and half-ops (which have a subset of operator commands) are the people that run that help run specific channel and are responsible for moderating the chat, so sometimes they might remove or silence people individually or set the channel to moderated mode.


when the channel is in moderated mode, comments from voiced users can still be seen. often channels will give voice or one of the operator modes to their helper bots.
When the channel is in moderated mode, comments from voiced users can still be seen. Often channels will give voice or one of the operator modes to their helper bots.


<span id="commands-cheat-sheet"></span>
== Command Cheat Sheet ==
== commands cheat sheet ==


this is a very small sample of commands that you may find useful as you get started learning irc. in many clients, there might be buttons for these.
This is a very small sample of commands that you may find useful as you get started learning IRC. Many clients might have buttons for these.


command parts shown in <code>[]</code> are optional.
Command parts shown in <code>[]</code> are optional.


* <code>/join #helpdesk</code>
* <code>/join #helpdesk</code>
Line 88: Line 86:
** open a conversation window with user “nickname”, and optionally include a message.
** open a conversation window with user “nickname”, and optionally include a message.
** the other user will ''not'' know you did this until you send messages.
** the other user will ''not'' know you did this until you send messages.
** this is useful for ensuring your conversation goes to the correct place, such as when you’re [[wiki/nicks|registering]] with <code>nickserv</code>.
** this is useful for ensuring your conversation goes to the correct place, such as when you’re [[Tilde.chat/Nicks and Accounts|registering]] with <code>nickserv</code>.
* <code>/me action</code>
* <code>/me action</code>
** use this for emotes. it will appear something like <code>* nickname action</code>.
** use this for emotes. it will appear something like <code>* nickname action</code>.
Line 95: Line 93:
** the optional message will be shown to every channel you are in.
** the optional message will be shown to every channel you are in.


some commands will differ in implementation depending on your client. if the following do not work as expected, see your client’s website for documentation or ask in their irc channel, which will be listed on their website.
Some commands will differ in implementation depending on your client. If the following do not work as expected, see your client’s website for documentation or ask in their IRC channel, which will be listed on their website.


* <code>/ignore nickname</code>
* <code>/ignore nickname</code>
Line 104: Line 102:
** may list the current ignores you have set.
** may list the current ignores you have set.


<span id="i-need-more-help"></span>
== I need more help! ==
== i need more help! ==


if you get lost, you can always join <code>#helpdesk</code>.
If you get lost, you can always join <code>#helpdesk</code>.


for a chat directly in your browser [https://tilde.chat/kiwi/ click here], click the <code>start</code> button, and ask questions.
For a chat directly in your browser [https://tilde.chat/kiwi/ click here], click the <code>start</code> button, and ask questions.

Latest revision as of 16:06, 6 August 2024

<- Back to tilde.chat

While this will not be a comprehensive guide on all the software available, it will hopefully point you in the right direction. it is adapted from the one on the libera.chat website

Connecting for the first time

To use irc, first you need to choose a client application. They vary a lot, but most will have the same basic features and do not cost money, so don’t worry about picking the wrong one.

You can always use our webchats to avoid installing anything yet: our kiwiirc or our gamja browser clients will automatically connect you to #helpdesk.

If you’re running a client on a tilde, your client might have been automatically configured for you when your account was made. Most tildes have command line clients like weechat or irssi already installed so you can try them out and decide which one you prefer. Try running weechat or irssi.

If you’re running a client you installed yourself on your own phone or computer, most will have some kind of intro or wizard to get you going. Look for a network called tilde or tilde.chat if there is a network directory, or set the network address to irc.tilde.chat with port 6697.

If there is no wizard, or the process is confusing, you can try to check out the client’s website for some documentation about how to set it up. you can also just connect through the kiwiirc or gamja webchats mentioned above and find someone to help. The webchats will connect you to #helpdesk, and someone there can point you in the right direction if you explain what client you are trying to use.

Talking

Just like in instant messengers, there will be a field in the app where you will be able to type things. This is where you chat.

This chat field is also where you can do commands to the server or the client. Commands start with a /.

Conversation Windows

Conversations windows are also known as tabs or buffers. They generally behave how you might expect from other chat apps.

In most desktop clients, a list of conversations will be down the left-hand side in a column. In phone apps, there might be a drawer widget you need to pull out.

Selecting different items in this list will change what is shown in the main section of the client, above the field you type chat and commands into.

The top one is probably the name of the network. When you are doing commands you don’t want others to see, such as registering an account, this is a safe place to type them.

Tabs starting with # are group chats, which are called channels. On desktop clients, a user membership list will probably show down the right-hand side of the screen when you have these conversations selected. On phones, the membership list might be in another drawer widget.

Tabs underneath the channels are private conversations you have with people, or bots, on the network. these are often referred to as a “pm” (private message) or “queries”.

Private Conversations

You can often start private conversations with someone by double-clicking on their name, also called a nickname or nick, in the membership list. If that doesn’t work you can achieve the same thing using the /query command. For example, if you wanted to say “hi!” to the person with the nickname “john” you would do:

/query john hi!

Some people don’t like unsolicited private conversations, so only do this with people you know from talking in channels after asking their permission.

Services

Services are specialized bots that help the network run smoothly. They manage users and channels, among other things.

Using services is how you register a nickname, and identify (log in) when you return for another IRC session in the future.

They’re also how you register channels if you ever need to do that.

Topics

In most irc clients, a channel’s topic description can be found at the top of the screen. If you can’t see all of it, you can have it displayed to you using the /topic command.

You can find new channels on our channels page to search by channel name or by topic description. Some clients like kiwiirc and hexchat have built in channel list search wizards. In command line clients, look for search instructions with /help list

Channel Roles

When you’re in channels, you might notice that some people in the membership list have symbols next to their nicknames. Most people will not have a role in the channels.

On tilde.chat, the people with symbols have either the “admin”, “operator”, ‘half-operator’, or “voiced” modes.

Admins own the channels. operators and half-ops (which have a subset of operator commands) are the people that run that help run specific channel and are responsible for moderating the chat, so sometimes they might remove or silence people individually or set the channel to moderated mode.

When the channel is in moderated mode, comments from voiced users can still be seen. Often channels will give voice or one of the operator modes to their helper bots.

Command Cheat Sheet

This is a very small sample of commands that you may find useful as you get started learning IRC. Many clients might have buttons for these.

Command parts shown in [] are optional.

  • /join #helpdesk
    • enter the channel #helpdesk.
  • /part [#helpdesk] [message]
    • exit the channel #helpdesk.
    • if no channel is given, you will part the channel you type this into.
    • the optional message will be shown to only this channel on your departure.
  • /nick nickname
    • changes your nickname to the one you specify.
  • /msg nickname message
    • sends a private message to user “nickname” without opening a new conversation window.
  • /query nickname [message]
    • open a conversation window with user “nickname”, and optionally include a message.
    • the other user will not know you did this until you send messages.
    • this is useful for ensuring your conversation goes to the correct place, such as when you’re registering with nickserv.
  • /me action
    • use this for emotes. it will appear something like * nickname action.
  • /quit [message]
    • disconnects you from the network.
    • the optional message will be shown to every channel you are in.

Some commands will differ in implementation depending on your client. If the following do not work as expected, see your client’s website for documentation or ask in their IRC channel, which will be listed on their website.

  • /ignore nickname
    • may stop you seeing the user talk. useful if they are being a pest.
  • /unignore nickname
    • may allow you to see the user again if you change your mind.
  • /ignores
    • may list the current ignores you have set.

I need more help!

If you get lost, you can always join #helpdesk.

For a chat directly in your browser click here, click the start button, and ask questions.