NNTP: Difference between revisions

Revision as of 08:38, 22 September 2021

The Network News Transfer Protocol (NNTP) is an application protocol used for transporting Usenet news articles (netnews) between news servers, and for reading/posting articles by the end user client applications.

Usenet was originally designed based on the UUCP network, with most article transfers taking place over direct point-to-point telephone links between news servers, which were powerful time-sharing systems. Readers and posters logged into these computers reading the articles directly from the local disk.

The tildeverse has a small, private net news network that can be accessed through several tildes using clients below. tilde.club and yourtilde.com provide public access for users outside of the tildeverse, or those who want access without first connecting to a tilde server.

Participating tildes

The following lists all of the known tildes that provides access to the tildeverse netnews.

tilde.club

Our primary gateway for those accessing from the outside. Read-write, accessible via news.tilde.club, nntp.tilde.club, and news.tildeverse.org, port 119. See also https://news.tildeverse.org/.

tilde.team

Read-only, accessible via news.tilde.team, nntp.tilde.team, and nntp.tildeverse.org, port 119. You have to ssh inside to post.

cosmic.voyage

Read-only, accessible via cosmic.voyage , port 119. You have to ssh inside to post.

yourtilde.com

Read-write, accessible via yourtilde.com, port 119.

News clients

slrn

slrn is a newsreader; see http://slrn.sourceforge.net/ for details.

First, add export NNTPSERVER="localhost" to your shellrc (.bashrc, .zshrc) and source it (source path/to/.shellrc).

Then run slrn --create to create the slrn config file, and lastly slrn -d to populate group names.

You’re now ready to run slrn! If the list is empty, press L (for list-groups) and enter * in the field for all groups. You might need to enter each group (pressing space) to get a proper count for how many (if any) unread messages there are.

pine/alpine

pine can read news; this http://www.chebucto.ns.ca/Help/News/PineNews.html might help. You can also read the FAQ from U Washington.

In Pine do

‘S’ for setup, ‘C’ for config, then
set ‘NNTP Server (for news)’ to news.tilde.club
Then go back to the main menu, and pick Folder List,
A for add, ^t for list

Emacs

M-x gnus in [[[#emacs|emacs]]] can read news, but you better know [[[#emacs|emacs]]] first before you start.

lynx

Lynx reads news, a la lynx news://news.tilde.club/tilde.general. It can even post news, but you have to design your own headers.

tin

There is also tin.

Thunderbird

If you’re using Thunderbird for email, it can also be configured for news.

Go to the Tools menu, -> Account Settings
Under Account Actions click Add Other Account...
Select “Newsgroup Account”
Type in the name you and email address you want associated with your posts. This can be your real name and tilde.club email address, or any other name (like your tilde username) and any other email address.
For the “Newsgroup Server” type news.tilde.club. Give it a name (“news.tilde.club” works fine), confirm a couple of times and you’re done! You should see a new entry for news.tilde.club in your accounts list.
Right click on “news.tilde.club” in your accounts list and click Subscribe...
You should see a dialog with a tree of news topics. Click one and click Subscribe to subscribe to the topic. When Thunderbird is running, it will periodically check for new messages to each of these topics. You will also see a list of topics in your accounts list with unread counts.
To post to a topic, open the topic and click the “Write” button.

SeaMonkey

The instructions for SeaMonkey are mostly the same as Thunderbird. The difference is that if you already created an account in SeaMonkey (whether for mail, RSS, or news), you create a new account by using either of the two options. Both of them will bring you to the Account Wizard.

Go to the File menu, -> New -> Account
Go to the Edit menu, -> Mail & Newsgroups Account Settings, -> Add Account...

Claws Mail

Setup

If you have any draft messages open, close them or you will get an error in the next step.
In the "Configuration" menu, click "Create New Account..."
In the "Basic" settings:
- Set the "Name of account" (optional).
- In "Personal information", Set "Full name" and "Mail address". Set "Organization" (optional).
- In "Server information", click the menu for "Protocol" and select "News (NNTP)".
- Set "News server", enter nntp.tildeverse.org, or your other news server address as appropriate.
Set other settings as desired.

Connecting via a Proxy

If you need to access your tilde news via a proxy, you can do so in the account preferences as follows.
If not in the initial account creation, go to the account preferences from the "Configuration menu": If you are in the tilde folders already, choose "Preferences for current account..."; otherwise choose "Edit accounts...", select the account from the list, and click "Edit".
Go to the "Proxy" page.
Check "Use proxy server", and enter the appropriate details.
- Note: to establish a proxy connection to your tilde server using SSH, you can the ssh -D option.
Click "OK".

Subscribing

After creating the account, it should appear as a folder in the main window.
Right-click the folder and choose "Subscribe to newsgroup..."
If you get an error, "Can't retrieve newsgroup list", try clicking "Refresh". Clicking "Refresh" must be done sometimes in case there are new groups available. If you still get an error, you may need to go back to the account settings and make appropriate adjustments. To debug the network connection you may want to check the network log: "Tools" menu -> "Network Log" (Shift+Ctrl+L).
Select the newsgroups you want to subscribe too. You can use the "Find groups" text box and "Search" button to search through the list of newsgroup names.
Click "OK".
The newsgroups you subscribed to will then appear in your folder list.
Eventually, the newsgroups will fill up with messages. You can trigger messages to be fetched from the "Message" menu -> "Receive" -> "Get from all accounts" (or the particular account name).

Writing and replying

Reply to news messages similarly as replying to email messages.
To start a new thread, go to the "Message" menu and select "Compose a news message".

@@ Line 69: / Line 69: @@
 === SeaMonkey ===
-[[File:SeaMonkey - File + New + Account.png|thumb|(1) <code>File</code> -&gt; <code>New</code> -&gt; <code>Account</code>]]
+[[File:SeaMonkey - File + New + Account.png|thumb|200px|SeaMonkey (1) <code>File</code> -&gt; <code>New</code> -&gt; <code>Account</code>]]
-[[File:SeaMonkey - Edit + Mail & Newsgroups Account Settings.png|thumb|(2) <code>Edit</code> -&gt; <code>Mail & Newsgroups Account Settings</code>]]
+[[File:SeaMonkey - Edit + Mail & Newsgroups Account Settings.png|thumb|200px|SeaMonkey (2) <code>Edit</code> -&gt; <code>Mail & Newsgroups Account Settings</code>]]
-[[File:SeaMonkey - Mail & Newsgroups Account Settings + Add Account.png|thumb|(2) Click on <code>New Account</code>]]
+[[File:SeaMonkey - Mail & Newsgroups Account Settings + Add Account.png|thumb|200px|SeaMonkey (2) Click on <code>New Account</code>]]
 The instructions for SeaMonkey are mostly the same as Thunderbird. The difference is that if you already created an account in SeaMonkey (whether for mail, RSS, or news), you create a new account by using either of the two options. Both of them will bring you to the Account Wizard.
 * Go to the <code>File</code> menu, -&gt; <code>New</code> -&gt; <code>Account</code>
@@ Line 77: / Line 77: @@
 ===Claws Mail===
-*Setup[[File:Claws-mail-new-account-preferences-tilde-news.png|link=|thumb]]
+====Setup====
-**If you have any draft messages open, close them or you will get an error in the next step.
+[[File:Claws-mail-new-account-preferences-tilde-news.png|thumb|200px|Claws Mail's New Account Preferences]]
-**In the "Configuration" menu, click "Create New Account..."
+* If you have any draft messages open, close them or you will get an error in the next step.
-**In the "Basic" settings:
+* In the "Configuration" menu, click "Create New Account..."
-***Set the "Name of account" (optional).
+* In the "Basic" settings:
-***In "Personal information", Set "Full name" and "Mail address". Set "Organization" (optional).
+** Set the "Name of account" (optional).
-***In "Server information", click the menu for "Protocol" and select "News (NNTP)".
+** In "Personal information", Set "Full name" and "Mail address". Set "Organization" (optional).
-***Set "News server", enter <code>nntp.tildeverse.org</code>, or your other news server address as appropriate.
+** In "Server information", click the menu for "Protocol" and select "News (NNTP)".
-**Set other settings as desired.
+** Set "News server", enter <code>nntp.tildeverse.org</code>, or your other news server address as appropriate.
-*Connecting via a Proxy[[File:Claws Mail - Tilde News - Proxy settings.png|link=|thumb]]
+* Set other settings as desired.
-**If you need to access your tilde news via a proxy, you can do so in the account preferences as follows.
+====Connecting via a Proxy====
-**If not in the initial account creation, go to the account preferences from the "Configuration menu": If you are in the tilde folders already, choose "Preferences for current account..."; otherwise choose "Edit accounts...", select the account from the list, and click "Edit".
+[[File:Claws Mail - Tilde News - Proxy settings.png|thumb|200px|Claws Mail's Proxy settings]]
-**Go to the "Proxy" page.
+* If you need to access your tilde news via a proxy, you can do so in the account preferences as follows.
-**Check "Use proxy server", and enter the appropriate details.
+* If not in the initial account creation, go to the account preferences from the "Configuration menu": If you are in the tilde folders already, choose "Preferences for current account..."; otherwise choose "Edit accounts...", select the account from the list, and click "Edit".
-**Note: to establish a proxy connection to your tilde server using SSH, you can the [https://man.openbsd.org/ssh#D ssh -D] option.
+* Go to the "Proxy" page.
-**Click "OK".
+* Check "Use proxy server", and enter the appropriate details.
-*Subscribing[[File:Claws Mail - Folders - Tilde News.png|thumb]]
+** Note: to establish a proxy connection to your tilde server using SSH, you can the [https://man.openbsd.org/ssh#D ssh -D] option.
-**After creating the account, it should appear as a folder in the main window.
+* Click "OK".
-**Right-click the folder and choose "Subscribe to newsgroup..."
+====Subscribing====
-**If you get an error, "Can't retrieve newsgroup list", try clicking "Refresh". Clicking "Refresh" must be done sometimes in case there are new groups available. If you still get an error, you may need to go back to the account settings and make appropriate adjustments. To debug the network connection you may want to check the network log: "Tools" menu -> "Network Log" (Shift+Ctrl+L).[[File:Claws Mail - Newsgroup subscription.png|thumb]]
+[[File:Claws Mail - Folders - Tilde News.png|thumb|200px|Tilde News now shown in your Claws Mail folders]]
-**Select the newsgroups you want to subscribe too. You can use the "Find groups" text box and "Search" button to search through the list of newsgroup names.
+[[File:Claws Mail - Newsgroup subscription.png|thumb|200px|Claws Mail's Subscription window]]
-**Click "OK".
+[[File:Claws Mail - Tilde News - newsgroups.png|thumb|200px|Claws Mail now showing your subscribed newsgroups]]
-**The newsgroups you subscribed to will then appear in your folder list.
+* After creating the account, it should appear as a folder in the main window.
-**Eventually, the newsgroups will fill up with messages. You can trigger messages to be fetched from the "Message" menu -> "Receive" -> "Get from all accounts" (or the particular account name).[[File:Claws Mail - Tilde News - newsgroups.png|thumb]]
+* Right-click the folder and choose "Subscribe to newsgroup..."
-*Writing and replying[[File:Claws Mail - Tilde news - Viewing a message.png|thumb]]
+* If you get an error, "Can't retrieve newsgroup list", try clicking "Refresh". Clicking "Refresh" must be done sometimes in case there are new groups available. If you still get an error, you may need to go back to the account settings and make appropriate adjustments. To debug the network connection you may want to check the network log: "Tools" menu -> "Network Log" (Shift+Ctrl+L).
-** Reply to news messages similarly as replying to email messages.
+* Select the newsgroups you want to subscribe too. You can use the "Find groups" text box and "Search" button to search through the list of newsgroup names.
-**To start a new thread, go to the "Message" menu and select "Compose a news message".
+* Click "OK".
+* The newsgroups you subscribed to will then appear in your folder list.
+* Eventually, the newsgroups will fill up with messages. You can trigger messages to be fetched from the "Message" menu -> "Receive" -> "Get from all accounts" (or the particular account name).
+====Writing and replying====
+[[File:Claws Mail - Tilde news - Viewing a message.png|thumb|200px|Viewing a message in Claws Mail]]
+* Reply to news messages similarly as replying to email messages.
+* To start a new thread, go to the "Message" menu and select "Compose a news message".
 [[Category:Services]]
 [[Category:Projects]]
 [[Category:Protocols]]